View Single Post
  #2 (permalink)  
Old 09-06-2010, 09:04 PM
CANAMracerdad's Avatar
CANAMracerdad  CANAMracerdad is offline
Moderator
 
Join Date: Dec 2009
Location: Tampa FL
Posts: 749
View CANAMracerdad's Photo Gallery(7)
first ck the radiator to make sure it is clean
did the dealer verify at what temp the fan cuts on? what temp did the thermostat open up at ? if they cannot answer this..... I hope they did not charge you.
does the fan work, is the fuse good?
the fan should come on at 205 degrees f and back off at 190 DEGREES
usually takes about 8-10 min idleing to get to that temp
do you have good anti-freeze in it ?
I suggest water wetter , it appears to work better than engine ICE.
we use yamacool
__________________
My son is a proven ATV MX champion rider

2009 Can-AM DS 450 XMX, Fox evol 2 fronts and fox rear, Custom motor by Williams ATV performance, motoworks exhaust , BCS intake..
2008 DS 450 Frame: removed all Rivets, modified front frame pieces,BCS frame support kit, replaced all bolts with metric fasteners,ENGINE: Custom Engine build by Williams ATV Performance, BCS intake,SR4G2,x factor nerfs and heels, PEP custom front and rear,Holz A-arms BRP race pkg
more every week
Reply With Quote