|
The steel sleeve needs to be bonded in w/red loc-tite or will crack your case possibly, there is another 2010 update 3- peice but imo BS! I recommend building up the case rear surrounding the swing bolt split with Devcon or JB or Permatex and adding additional gasket material to the area at the split where there is little gasket and I have seen a few leak from the enlarged hole/bulletin. Also add some epoxy to the area where the crack occurs..
Bond in your cyl wall oil squirter too, we had one break ruin tranny gears, etc, expensive!
Last edited by TNT; 09-07-2010 at 07:35 PM.
|