|
I have a '10 xmx and I installed a pro armor cord. I pulled off the hood, and just above the radiator on the left side (facing the front of the machine) there is a pair of wires coming from the wiring bundle with a quick connect end. The one end will accept the pig tails from the tether cord, you just need to get the correct size female ends to crimp onto the pig tails. Total time to install was about twenty minutes. Better than cutting and splicing into the keyed ignition wires. Don't know if this quick connect is on all models, but is definitely on the xmx. Simple and safe way to install. Hope this helped.
|