|
For everybody who comes to this site and wants to know how to get more bottom end. First things first...aftermarket pipe. I run a Motoworks and I know that it helps out alot with bottom end. Get a 13 front sprocket....trust me that alone helps out alot. If its too much bottom end then drop one tooth in the rear. Tag metals makes sprockets for front and rear, and I know that hot seat powersports has them as well, and they have them anodized as well. The cheapest front 13 is on ebay, and it is brand new...I had one.
Also the shaft where the front sprocket goes on is thredded in the middle, you need to take a short metric bolt, with a fairly good sized washer and put it on there, The little ring that holds it on does break off sometimes, and you will loose your sprocket.
|