trx axle, ltr spindles ?

seank360 · #1 (**permalink**) 12-25-2011, 06:25 PM

you can run the trx axle with a carier on the ds? if so im about to do so because it looks was better, and how would you run the ltr spindles?
thanks

gregory · #2 (**permalink**) 12-25-2011, 07:18 PM

No you cant run a trx axle on a ds450, but you can use the rear sprockets off a trx. As far as ltr front hubs you need custom arms and a ltr450 stem with so mods to make it work.

mikesr · #3 (**permalink**) 12-25-2011, 08:14 PM

Quote: Originally Posted by gregory

no you cant run a trx axle on a ds450, but you can use the rear sprockets off a trx. As far as ltr front hubs you need custom arms and a ltr450 stem with so mods to make it work.

yes you can run trx axle.just shove it in backwards and check your clearances

gregory · #4 (**permalink**) 12-25-2011, 10:37 PM

Quote: Originally Posted by mikesr

Quote: Originally Posted by gregory

no you cant run a trx axle on a ds450, but you can use the rear sprockets off a trx. As far as ltr front hubs you need custom arms and a ltr450 stem with so mods to make it work.

yes you can run trx axle.just shove it in backwards and check your clearances

Ok and you've done this before?

seank360 · #5 (**permalink**) 12-25-2011, 11:09 PM

I've seen it done, I was crious about it, don't you have to run a different carrier.? And then yu would need to run brake caliper and everything?

gregory · #6 (**permalink**) 12-25-2011, 11:50 PM

Well i just happend to have a honda axle and a ds without a axle in it ill have to try tomorrow.

hcomras · #7 (**permalink**) 12-26-2011, 12:35 AM

Yea I've heard of this done it uses honda sprockets, disc and hubs...

blaster99 · #8 (**permalink**) 12-26-2011, 08:24 AM

I believe you will need the whole Honda rear end. Bearing carrier, rear brake caliper, brake caliper mount, etc.

DS19 · #9 (**permalink**) 12-26-2011, 01:07 PM

all honda stuff carrier brake caliper rotor and srocket and sprocket up would probably woork. but why?

hcomras · #10 (**permalink**) 12-26-2011, 01:24 PM

Quote: Originally Posted by seank360

you can run the trx axle with a carier on the ds? if so im about to do so because it looks was better, and how would you run the ltr spindles?
thanks

apparently it looks better? i dont see how...other than...um...yea i dunno lmao

i would assume you would do this for the massive amount of honda parts floating out there versus the little stock of can-am parts? or maybe strenth? although i have had zero issues with my axle, carrier or rear caliper etc...only gripe is the sprocket strength and thats cuz its aluminum...