Water Pump Assembly Configuration

[ds450xracer]

In what order do the parts for the water pump assembly go on; the seals, bearing, and the spacers, there is the neopream seal, the metal seal, a washer, and a bearing? Trying to get this bike back together for the GNCC this weekend so I need this information in a hurry, anyone who knows off hand or has a shop manual to look it up would help us out alot.
thanks

[TNT]

Looks like the order is,

• Bearing
• Inner oil seal rubber(lip towards bearing)(use seal pusher or take care not to damage)
• Outer seal (use loctite on OD)(use a seal press or be careful)
• Fill cavity between seals w/Dow Corning 111 or other silicone based heavy sealant.
• Apply engine oil on shaft install w/distance sleeve into clutch cover
• Place thrust washer on water pump shaft and fit clutch cover on crankcase

Make sure pin in the water pump shaft engages in slot on intermediate gear, if there’s a gap do not force recheck

That help?