How do I get more power out of my ds??

guy_t · #1 (**permalink**) 10-24-2011, 08:09 PM

hello all ,my name is guy I'm from Israel and i new in this forum

.
i have a 2010 ds 450 xc and i want to get more power from my atv.
i read some thread and i did not understand too much.
i have on my ds slip on hmf Exhaust And that's all.

1.What exhaust most recommended? (Away ron woods Exhaust) i didnt like him . i want full System exhaust.

2.What about the air intake?

3.what the better way, put optimaizer and cut the pink wire? or just cut the wire?

I have no idea About the subject.
tnx all

fast507 · #2 (**permalink**) 10-24-2011, 09:06 PM

Shalom from the United States, Guy:
1. The Woods, Motoworks and Dasa seem to be throwing down the big numbers. You may have access to some of the Euro stuff we cant get here in the States.
2. BCS, Pro Design and a few other companies make air intakes complete with filters. You may do a broad search on EBAY.com for ds450x parts and come up with stuff readily available in Israel.
3. On the 2010 models, If you install a fuel interface, do not cut the wire.

USE THE SEARCH FEATURE HERE AND YOU WILL FIND MULTIPLE THREADS FOR EACH QUESTION YOU HAVE ASKED. Mazel Tov!!!...

guy_t · #3 (**permalink**) 10-24-2011, 09:17 PM

Thank you very much for your help

if i cut the wire Without put fuel interface i fell some change or the better way is to put fuel interface?

bad moose · #4 (**permalink**) 10-24-2011, 10:49 PM

BCS air intake ring and filter

Motoworks G2 full system

If you plan on doing more mods I would just get the Motoworks FMI. They are a good group of guys and can help you set it up for those mods and future mods.

If no more mods just cut pink wire. You will feel a little diference. When you get the full exhaust and bcs ring you will still be ok with pink wire. There are a bunch of guys running this set up including myself.

Rdy2goride · #5 (**permalink**) 10-24-2011, 10:58 PM

If you plan on doing more mods, get a PC5 and autotune it's the only way to go. I have it on my 08 DS 450X and am loving it, no matter what I do to the motor or air intake it will tune itself to run the AFR I tell it to...

Full motoworks SR4 G2 pipe
Velocity air filter
PC5 and auto tune

K_MAN · #6 (**permalink**) 10-25-2011, 04:51 PM

I never liked the Ron Woods stuff but if you have the money his Stage 3 kit puts down crazy horsepower numbers, and his exhaust could be built better but I love it! I also love my G2 which looks amazing and throws down some serious power.

BCS intake kit is also a solid way to go as far as intake

Also I would go PowerCommander 5 with the auto tune as well!

Primal_urge · #7 (**permalink**) 10-26-2011, 02:45 PM

I run a Motoworks full system, Bcs intake ring with KnN filter "lid off" Motoworks FMI. Dont forget your cooling system! use engine ice, vent your plastics and while your ordering stuff grab a inline cooler from Bcs.

guy_t · #8 (**permalink**) 10-28-2011, 01:53 PM

tnx all ,You helped me a lot.

I think I'll go on motoworks g2 full,motoworks fmi,and As for the air filter i think about this:
Pro Design Pro Flow K&N Air Filter Can AM DS450 DS KN | eBay

As good as the bcs or not like him ?
i want the bcs,but in ebay the seller is Not sending to Israel :\
tnx

kevinds450 · #9 (**permalink**) 10-28-2011, 05:17 PM

go to bcsperfomance.com, contact him to ship to you.
they shipped me worldwide!

guy_t · #10 (**permalink**) 11-05-2011, 06:39 PM

ok,tnx u .

Why not cut the pink wire in the 2010 and up??

I think my quad 2009 because of its shape.
look at the pic uts my quad:
ImageShack® - Online Photo and Video Hosting

Licenses street date of his rise in:1/2010
Now my question is cut the pink wire or not? i want put motoworks fmi