what do i do??

This is a discussion on what do i do?? within the Engine/EFI/Drivetrain forums, part of the Can-Am DS450 Tech Discussion category; If your trying something new you have to give it chance and work with it. With racing you should at least know that....


Go Back   Can-Am DS-450 Forum :: DS450HQ.com > Can-Am DS450 Tech Discussion > Engine/EFI/Drivetrain

Engine/EFI/Drivetrain Discuss engine, fuel injection, air intake, and drivetrain modifications to your Can-Am DS450 in here.

Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old 11-11-2011, 07:56 PM
bad moose's Avatar
Moderator
 
Join Date: Jun 2010
Location: Valley Center KS
Posts: 1,688
View bad moose's Photo Gallery(0)


If your trying something new you have to give it chance and work with it. With racing you should at least know that.
__________________
08 ds 450
Motworks SR4 G2
BCS Intake w/ KN airfilter
Pink Wire Mod
Streamline 11 pos Steering Stabilizer
Epic a arms w/ kyb remote ressi shocks
XMX rear shock
Yeehawww
Sig worthy quotes:
I don't have an attitude. I have a personality you can't handle.
Reply With Quote
  #12 (permalink)  
Old 11-11-2011, 10:09 PM
XC.Mitch's Avatar
Member
 
Join Date: Aug 2011
Location: Southern Ohio
Posts: 69
View XC.Mitch's Photo Gallery(0)
Your clutch is shot
Reply With Quote
  #13 (permalink)  
Old 11-13-2011, 02:30 PM
Member
 
Join Date: Nov 2010
Location: spartanburg
Posts: 35
View shaulis199's Photo Gallery(0)
Quote: Originally Posted by mikesr View Post
how much for your can am?
pm me, make an offer


and you think its just the clutch?
Reply With Quote
  #14 (permalink)  
Old 11-13-2011, 07:25 PM
Member
 
Join Date: Nov 2010
Location: spartanburg
Posts: 35
View shaulis199's Photo Gallery(0)
does anybody else think its my clutch?
Reply With Quote
  #15 (permalink)  
Old 11-13-2011, 07:48 PM
hcomras's Avatar
Super Moderator
 
Join Date: Feb 2009
Location: so cal
Posts: 4,545
View hcomras's Photo Gallery(25)
only one way to find out...
__________________
all parts for sale!

Reply With Quote
  #16 (permalink)  
Old 11-14-2011, 10:35 AM
Senior Member
 
Join Date: Jul 2010
Posts: 155
View mikesr's Photo Gallery(0)
Quote: Originally Posted by shaulis199 View Post
Quote: Originally Posted by mikesr View Post
how much for your can am?
pm me, make an offer


and you think its just the clutch?
pull the cover off and take a look maybe that's the problem.PM me
Reply With Quote
  #17 (permalink)  
Old 11-17-2011, 08:49 PM
Senior Member
 
Join Date: Dec 2010
Posts: 173
View scotturban54's Photo Gallery(0)
weve had every brand,, you got to work on them all, hondas might have the most reliable motor in general, but stuff still goes wrong, If you ride a quad very hard at all, your going to have to work on it, Thats what happens..
Reply With Quote
  #18 (permalink)  
Old 12-03-2011, 12:43 PM
Junior Member
 
Join Date: Jun 2011
Posts: 5
View super senior's Photo Gallery(0)
check the rear sprocket bolts if they are loose tighten them, also check sprocket for cracks, i had the same problem
Reply With Quote
  #19 (permalink)  
Old 12-04-2011, 07:54 PM
Member
 
Join Date: Dec 2009
Location: statesville nc
Posts: 93
View canamxteam's Photo Gallery(0)
Why does everyone think honda motors are reliable? Every time i smell oil burning during a race i come up on a honda wth and on the starting line same thing
Reply With Quote
  #20 (permalink)  
Old 12-06-2011, 12:27 AM
Member
 
Join Date: Nov 2010
Location: spartanburg
Posts: 35
View shaulis199's Photo Gallery(0)
Quote: Originally Posted by super senior View Post
check the rear sprocket bolts if they are loose tighten them, also check sprocket for cracks, i had the same problem
i know i have a tooth missing on the front, just found that out. but, if it was just that then why wouldnt it do it in neutral? and i took my clutch cover off, looked fine, did mess with no plates though.

and its not that you dont have to work on hondas just as much, its just there cheaper, and easier to work on, and if i cudnt fix one, my friend will work on a honda.. he wont touch my can am
Reply With Quote
Reply

Lower Navigation
Go Back   Can-Am DS-450 Forum :: DS450HQ.com > Can-Am DS450 Tech Discussion > Engine/EFI/Drivetrain


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


» Search Forums

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 02:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.