 |

04-05-2010, 04:15 PM
|
|
Junior Member
|
|
Join Date: Jan 2010
Posts: 28
|
|
|
No rear brakes?
Just was out for a ride and realize i had no rear brakes at all. I checked the fluid and it was full. ran out of time to check on anything else. Any ideas where to look at?
|

04-05-2010, 04:24 PM
|
 |
Senior Member
|
|
Join Date: Feb 2010
Location: MI
Posts: 208
|
|
|
for the master cylinder for the rear brake there is a spring there that adds tension to it check that
|

04-05-2010, 05:23 PM
|
 |
Super Moderator
|
|
Join Date: Jul 2009
Location: york pa
Posts: 3,048
|
|
|
ok heres what your going to do take the cap off the res, there will be a rubber cap in the top of it take a razor and make a "very" small cut in the middle of that 1/4 inch. then your going to bleed the system starting at the line coming out of the reservoir pump pedle -bleed do this about 5 times "keep adding fluid"do not let it go dry!!!..next "if you still dont have breaks bleed the caliper 5 times "still adding break fluid" put cap back on and see where your at
|

04-05-2010, 10:49 PM
|
 |
Member
|
|
Join Date: Feb 2009
Posts: 86
|
|
Quote: Originally Posted by gregory
ok heres what your going to do take the cap off the res, there will be a rubber cap in the top of it take a razor and make a "very" small cut in the middle of that 1/4 inch. then your going to bleed the system starting at the line coming out of the reservoir pump pedle -bleed do this about 5 times "keep adding fluid"do not let it go dry!!!..next "if you still dont have breaks bleed the caliper 5 times "still adding break fluid" put cap back on and see where your at
X2 on what Gregory said
__________________
08 DS450 #419
2010 Yamaha Quadcross #2 in 450 Prod Beg.
2011 Yamaha Quad X Series #1 in Vet Nov.
2012 Yamaha Quad X Series Vet Int.
Big thanks to Family, Friends, BCS, Troy Lee, LSR and Big O Tires!
|

04-06-2010, 08:10 AM
|
|
Member
|
|
Join Date: Jan 2010
Location: Quebec
Posts: 71
|
|
|
got same problem on mine...and the lining of the pad hae goes away :P
__________________
Brp/ Can am
www.s2racingteam.org
Elitech Sport Évasion
Kimpex
Microbrasserie le Trou du Diable
Bcs Perforamance
Clément Hydraulitech
|

04-06-2010, 09:03 AM
|
|
Senior Member
|
|
Join Date: Dec 2008
Posts: 293
|
|
|
Cut the slit in the black diaphram as stated and replace the stock pads w a quality pad like DP Brakes Sintered pads. the stock pads wear off very fast.
__________________
08 DS450X
|

04-06-2010, 02:14 PM
|
|
Junior Member
|
|
Join Date: Jan 2010
Posts: 28
|
|
|
Thanks, I will try that next time I get to my parents. I will make sure they work, then replace the pads.
|
 |
Lower Navigation
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Search tags for this page |
|
bleed, bleed brakes ds 450, bleeding ds450 rear brakes, brakes, can am ds 450 no rear brakes, can am ds450x no rear brakes, ds 450 how to bleed rear brakes, ds 450 no rear brakes, ds450 bleed rear brakes, ds450 bleeding brakes, ds450 how to bleed rear brakes, ds450 no rear brakes, ds450 rear brakes, no brakes, no rear brakes, no rear brakes can ds 450, rear brake, rear brakes, sintered
Click on a term to search our sites for related topics.
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
front brakes
|
jsracing23 |
Suspension/Steering/Chassis |
5 |
02-18-2010 06:37 PM |
|
combined brakes
|
millsys |
Body/Controls/Protection |
0 |
01-11-2010 06:29 PM |
|
brakes
|
cassman |
General Discussion |
8 |
04-13-2009 10:31 AM |
|
|
All times are GMT -4. The time now is 09:36 PM.