How do I get me plastic off???

[beez33]

I Have a 08 450 and I am trying to cut the pink wire but cant figure out how to get my plastic off.

Thanks

[DiRtDevilz1]

2008 Can-Am DS 450 OEM Parts, 2008 Can-Am DS 450 OEM ATV Parts - BikeBandit.com

best i can do bro. hope it helps

[rrguy]

Someone can help you more but make sure you got some good Torq drivers & some spare time maybe a manual might be handy, it takes a while

[beez33]

Thanks for the help. How did you guys get that rivet out?

[DiRtDevilz1]

U dont need to take the riviets out. ok starting from the back (im doing this from memory so it might be off a little) First off you have to take off the headlights, after that.
1) 2 screws on top and on the sides furthest back on the plastic
2) 2 by the supports close to the throttle body. in those there are 2 metal washers or something. dont lose em
3)10mm bolt under the front fenders.
4) 1 screw in the front at the bottom of the radiator gaurd.
5) unscrew the ring on the key.
than wiggle it around alittle bit and it should come right off.
AGAIN im doing this by memory so theyre might be things im missing

[blue smoke]

You don't remove the rivets. The plastics from the front all the way to where it bolts to the subframe comes off as one piece. Just remove the headlights, seat, key fob nut, and all bolts. Then pull the plastic up and out. It took me quite a while the first time.

[hcomras]

and you dont have to pull the backs off. just the fronts. mighta been obvious but i did it the first time lol

[beez33]

Thanks for they help guys, Gregory called me last night and gave me the run down. Got the pink wire cut and plastic back on.