Brake hub and front hub removal

[fxracerx450x]

Ok so I just found a good deal on ebay for a Blingstar rotor guard $60 vs retail $110+. I've never had my rear brake hub off yet and have no clue as to how to take it off. Then I need to pull one of my front hubs off and see what is going on inside. I need a somewhat detailed description how to remove these hubs so I do not turn into the mad man with the torch and mess something up. Id try to figure it out my self but a Can Am is not Honda which I'm used to working on. A Can Am is like a Bugatti and a Honda is like a Chevette, at least in my eyes

[Droors92]

Try downloading the shop manual. Its free. Look under "Important Information" or do a search.

[fxracerx450x]

Ive tried that and got it loaded but it messed my computer up really bad.

[bad moose]

Front hub removal:

Remove tire and external brake disc
Remove wheel hub cap unfold lock tab and screw
Remove caliper and outer brake pad.
Pull wheel hub
Remove the small oring, the support ring and the large oring.

Hub screw torque 35 ft/lbs

Rear brake disc hub removal

remove lr wheel, hub, and conical support ring
remove caliper screws and caliper
remove and discard lock washer
remove brake hub with disc brake

Rear disc screw torque 18 ft/lb
rear hub nut torque 184 ft/lb

Looks fairly straight forward.

[fxracerx450x]

Alright sounds easy