Can-Am DS-450 Forum :: DS450HQ.com banner
motor
1-8 of 8 Results
  1. Engine/EFI/Drivetrain
    So i recently purchached a stock 2008 ds 450 xc and im re doing the whole thing to make it race ready. Im kinda green on the motor side of things so please bear with me.. I have a couple questions about doing a rebuild. First of all what is the difference between a 13:2:1 high compression and a...
  2. Wanted
    I've got an 08 that desperately needs a motor. I managed to blow it up real good and at about 6 grand for a new one from a dealer I'd rather just go used seeing as its an 08 and even if it was in perfect condition, the whole bike wouldn't be worth that anymore. Stock, built, whatever. Just want...
  3. Parts & Accessories For Sale
    I have a 2008 ds450x built motor by bcs, with Xmx shocks and a arms. Extended tie rods, cv4 yellow coolant hoses, k&n filter with aftermarket intake Motor has 14.1 cp piston, port and polished web cams oil cooler mod and Hinson basket, motorworks sr4 full exhuast with wrapped pipe. Motor has...
  4. Engine/EFI/Drivetrain
    I'm new to the DS completely and it's hard to navigate through the forums to try and answer my own questions, also any tips would be nice. Turns out stock motor with aftermarket programmer and motoworks exhaust just isn't going to cut. I'm fan of high compression pistons as I used a Baldwin...
  5. Engine/EFI/Drivetrain
    Need to replace the starter motor on a DS450. Was hoping to just disconnect both bolts holding it in place and positive and negative connections and slide motor out, however just cannot get motor out. How much do I need to remove in order to replace it. Has anybody done this previously?
  6. Quads For Sale
    We race the atv nationals and get new Atvs every year. I am selling two can am 450s with everything on them that anyone could possibly want. One is a 2012 and one is a 2013 model. We bought them both brand new this year and have titles for both Full Walsh suspension Fox gold shocks Renthal...
  7. Parts & Accessories For Sale
    I have tons of stock and aftermarket parts for sale. **Full HMF competition series exhaust-sold *Precision stabilizer mount w/ extra rod-sold Houser long travel a arms-sold **fox podium x rear with reservoir mount(have mx parts for it, not the coil over spring but the pieces inbetween)- $500...
  8. Dyno/Tuning Room
    I have a 2011 DS450X MX with an HMF slip on and a K&N intake with a high-flow lid and an Attitude Industries fuel programmer. I was hoping to add just a bit more power and was thinking about doing some minor motor work: Cams, piston, port and polish. I was told to go have my motor professionally...
1-8 of 8 Results
Top