Can-Am DS-450 Forum :: banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Important Information
    I have a 2014 canam ds 450efi and I recently replaced all the topped gaskets and now the bike does not want to start. I believe I have the timing wrong but I don't know what to do at this point, I didn't lock the crank with the bolt while rebuilding the topknot therefore the crank was freely...
  2. Engine/EFI/Drivetrain
    So last fall I had an issue that was progressive with my timing cgain tensioner. Here is a link to my you tube video from last fall ... I sent my motor to Rossier Engineering and he tor it down did a top end rebuild new cam and green injector and stated that the...
  3. Engine/EFI/Drivetrain
    hey guys i just rebuilt my quad and i did the cam mod. when i went to start it it turns over and over with a occasional backfire. i was thinking timing but i 80% sure i did that right but i never did anything with the shims or checked valve clearance. do i have to change them for the mod? i...
1-3 of 3 Results