Can-Am DS-450 Forum :: DS450HQ.com banner

1 - 19 of 19 Posts

·
Registered
Joined
·
1,667 Posts
Discussion Starter · #1 · (Edited)
Here is a thread where you can see all of the past winners of the Quad of the Month contest.

November 2010: Fast rap
pro Precision stabilizer
LSR A-arms
Fox floats gen2
flex bars
motoworks full pipe
DWT wheels
goldspeed tires
Durablue +4 axle




December 2010: Dickie
2009 DS450xmx

Fasst Co. Flexx Handle Bars
Precision Pro Steering Stabiliser
BRP Verticle Grill
DWT Wheels
BCS Chain Guide
BCS Disc Finn
Fox Podium Rear Shock (not pictured)
Fuel Customs Air Filter with adapter ring
Motoworks SR4 Full System
E-Sticky Graphics




January QOTM: pmalt




Febuary 2011: 500ex

Here are a couple pics from my ride. I just got in in November, its a factory DS from Motoworks, WORCS series. I took it appart, and give it some colour. Turned out great.

Mods:

Motoworks porting
2 exhaust cam
Motoworks full exhaust
Full fox suspension
Holz a-arms and steering post
Rath bumper, nerfs and grab bar
Precision steering stabilizer
Right now it`s got it`s snow shoes on, Maxxis 4 snow`s on hipers in the rear, studded Razr`s front
Lowered subframe
Renthal twin was bars
And alot more small details i`m not thinking about.



March 2011: Gary215

Rath Racing- Bumper, GrabBar, and Nerfs

DWT Champion in a box

Goldspeed tires

Can Am race package

Flexx bars



April 2011: Maille99

2008 ds 450 x
ECD custom graphic
yoshimurai exhaust
douglas mx in a box rims
goldspeed tires
K & N
Pro Taper bars
Pro Armor kill switch
MX nerf bars
Fox evos
lonestar extended arms
regina chain
louver


May 2011: cccutter
rath nerfs
tag bumper
rossier motor and exhaust
xmx a-arms *thanks to cam reimers to hooking me up with these*
xmx shocks rebuilt by hygear
xmx axle
precision pro dampener
dwt wheels and tires



June 2011: Gregory
2008 ds450x
Engine:
Bcs epox port and polish
Bcs exhaust cam swap
Bcs stainless steel valves w/5 angle
Bcs oil sprayer
Bcs engine rebuild ,rings,gaskets and trued crank
Bcs coolent system upgrade
Bcs oversize TB
Bcs intake ring and KN filter
Bcs remaped ECU
Bcs clutch
Ngk spark plug wires
Bcs clutch cover mod
Brp green injector
Motorworks gr2 "full system"

Drivetrain and Shocks:
Fox evols LT
Fox podium
Houser LT pro arms
Rocket ron reworked linkage
Lonestar axle
Bcs carrier
Bcs shark fin
Bcs rear brake upgrade
Bcs 38t steel
Bcs case saver

Body and Controls:

Honda master w/ ASV F5 lever
ASV F3 Ltr clutch lever
Houser +1stem
Pro Armor kill switch
Bcs race harness
Yz start button
Bcs stablizer mount system
Per stabilizer
Quadtech hump seat
Xmx wheels on goldspeeds
Bcs ecu protecter
Pro armour front bumper
Blingstar rear bumper
Rath nerf bars
Esticky graphics
Odi down hill biker grips


 

·
Registered
Joined
·
708 Posts
hahahaha... I know right, it flew off when I was on the freeway!!!
 

·
Registered
Joined
·
1,672 Posts
who did you get your graphics from?

BTW.....VERY SEXY!!!!!
 

·
Registered
Joined
·
1,672 Posts
nice, thanks!
 

·
Registered
Joined
·
132 Posts
are those dc-4 longtravle a arms? or are they the "sport" 1.5 a arms??
 

·
Registered
Joined
·
132 Posts

·
Registered
Joined
·
132 Posts
their excellent! i love my lonestar arms!!!
haha yeah your the only one i know of that has the actual +2 a arms lol... i wish they kept making them :(
 

·
Premium Member
Joined
·
4,307 Posts
June 2012 winner

2011 DS450xmx

Chassis | Suspension | Controls:

Frame: Stock
A Arms: XMX
Swingarm: XMX
Steering Stem: XMX
Stabilizer: Precision Pro
Axle: XMX
Carrier: Stock
Locknut: n/a
Hubs F|R: Stock
Bars: Fasst Co. Flexx
Throttle/Clutch Lever: Streamline Reflex Lever and Perch
Nerfs: XMX netted with Custom Monster Pegs
Bumper: XMX
Grab Bar: XMX
Front Shocks: FOX Float Evol X
Rear Shock: FOX Podium X
Brakes F|R:Honda Front Master Cylinder with Streamline Reflex Lever, Stock Rear
Brake Lines: Dual Streamline - Blue
Rotors F|R: Stock
Rims F|R: DWT Champion-in-a-box
Tires F|R: Kenda Klaw


Body:

Plastic: XMX with Race Cut front fenders
Graphics|Seat Cover: e-Sticky Graphics with XMX Seat cover
Number Backgrounds: e-Sticky Graphics
Handguards: N/A
Bar Pad: Fasst Co Flexx
Fuel Tank: Stock


Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 450
Cam:Stock
Carburetor: EFI
Air Filter|Box: Larger Intake Ring with Fuel Customs Filter
Pipe|Silencer: Motoworks SR4 G2 Full System
Clutch|Plates: Stock
Gearing F|R: 13/39
CDI|Killswitch: Pro Armor
Cooling: Vented Fenders, Hard wired Fan, Engine Ice, BCS In-line Cooler
Other:

Custom Lowered Subframe and Kill Switch Relocating plate

BCS Performance Front Sprocket Retainer, Case Saver, Chain Guide, Disk Protector, ECU Protector, Coil Relocator, NGK Race Plugs

Can-Am Race Department Wiring Harness

More pics can be found at 2012 Bike Prep


























__________________
2012 Sponsors:
Bundaberg - Hervey Bay Can-Am
e-Sticky Graphics
Fasst Company - Flexx Handlebars
Hardiman ATV
One Industries
Quad Squad
Scott Goggles

'Like' my new Facebook Page!
www.facebook.com/jdick38
 

·
Premium Member
Joined
·
4,307 Posts
MX45OR

Senior Member
Join Date: Aug 2009
Location: Maryland
Posts: 115
(0)

Here is mine:
09 DS450 XMX
Rossier exh.
Rossier ecu reflash
Green injector
port/polish/epoxy head
Titanium oversized exh. valves
Titanium intake valves
HDuty valve springs
Tit. retainers
Webb exh. cam
Wiseco 13:1 high comp piston
CV4 hoses
ESR temp guage
BCS cooler
BCS seat catch
BRP race intake(no box)
CFM oil tank
Fasst Flexx bars
TRX450R front master swap
ASV clutch lever
Spider grips
Powermadd hand guards
Quadtech hump seat
FTR graphics
Moose bumper
Pro Armor monster pegs and nerfs
Pro Armor killer
YZ start switch
Titanium Epic Upper arms
Precision damper
Fox EVOL front susp.
Rocket Rons KYB rear rebuild
Rocket Rons pullrod
Cut & Flared ram air scoops (I hate swiss cheese,tastes like feet)
MX cut front plastics
Hand made case saver(im a professional machinist, so hand made means made on cnc equipment)
I know Im forgetting something but you get the idea about how much work went into her
Attached Thumbnails
 

·
Premium Member
Joined
·
4,307 Posts
2008 can-am ds450
Lonestar longtravel a-arms
lonestar axel
P.E.P pb1 front shocks
fox podium P.E.P sf mod rear shock
dwt beadlock rear wheels
4x1 itp front wheels
razr mx front tires
Dunlop quadmax rear tires
tag +1 steering stem
faast flex handle bars
odi lock on grips
pro armor front bumper
pro armor nerf bars
quadtech hump seat
bcs seat latch
race ecu
asi radiator hoses
spastic graffics
bcs intake ring
lowered subframe
rossier full exhaust
gibson stick steering dampener















 

·
Premium Member
Joined
·
4,307 Posts
2008 ds450
race-tech triple rate shocks
renthal bars
ODI locking grips
Works Connection unbreakable levers
pro-armor kill switch
pro-armor nerfs with monster pegs
pro-armor bumper
blingstar grab bar
DFR graphics
fmf 4.1 with mega bomb
air-box delete
pink wire cut
14-38 gears
NGK race wires
BCS in-line cooler
engine ice
lowered subframe
probably a few more knick-knacks here and there
Attached Thumbnails
 

·
Premium Member
Joined
·
4,307 Posts
Logan999:

2011 DS450xmx

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Walsh Flow +2
Swingarm: Walsh Savior
Steering Stem: Walsh +1-1
Axle: XMX
Carrier: Stock
Bars: Renthal
Throttle/Clutch Lever: ASV F3 Shorty Lever and Perch
Nerfs: Rath 44 Series with Monster peg
Bumper: Rath Signature Series
Grab Bar: Rath Signature Series
Front Shocks: FOX Float Evol X Gen 2 with Kashima Coating
Rear Shock: FOX Podium X
Brakes:Honda Front Master Cylinder
Brake Lines: Streamline
Rims F|R: Hiper Tech 3 Dual Beadlock
Tires F|R: Maxxis RZR Crosses

Body:

Plastic: XMX with Race Cut front fenders
Graphics|Seat Cover: e-Sticky Graphics with XMX Seat cover
Number Backgrounds: e-Sticky Graphics
Handguards: Powermadd
Bar Pad: Renthal Factory
Fuel Tank: Stock

Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 450
Cam: Dual Exhaust Cams
Carburetor: EFI
Air Filter|Box: BCS Intake ring with 4 inch K&N Filter
Pipe|Silencer: Motoworks SR4 G2 Full System
Clutch|Plates: Stock
Gearing F|R: 13/39
CDI|Killswitch: Pro Armor
Cooling: BCS In-line Cooler
Other: Green injector, 50mm bored throttle body, radiator mod, CV4 hoses, ECM relocate, ECM re-map, BCS steel sprocket, Precision clamps, ODI grips, Pro-Armor killswitch, BCS wire harness, BCS lowered subframe





 

·
Premium Member
Joined
·
4,307 Posts
Logan_999

Senior Member
Join Date: Jun 2012
Location: Delaware
Posts: 553
Liked: 5 times
(0)

Both quads are pretty much the same other then motor work but no one needs to know whats going on in there :)

Everything BCS makes to keep it short
Walsh all around
LSR fron hubs
Dwt Rims
ITP tires
Elka stage 5's
Jetrim seats
Rath all around

This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3.
 
1 - 19 of 19 Posts
Top